Archives: Producten

Mould 160x40x40

The 160x40x40 mould is the smallest in our range. Its smaller size makes it ideal for use in boundary walls. By using the 40x40 divider, you can create blocks with the dimensions 40x40x40, 80x40x40 and 120x40x40. You can start working quickly on small projects with these blocks and building walls using them becomes a…

lees meer

Mould 150x60x60

The 150x60x60 mould is suitable for producing blocks for storage of retaining walls and storage bays, just as with the 180x60x60 mould. The blocks produced using this are slightly less long, making them lighter and thereby easier to move. By using the 60x60 divider, you can create blocks with the dimensions 60x60x60 and 90x60x60.

lees meer

Divider 60×60

The 60x60 divider makes the production of half, quarter and three-quarter concrete blocks possible. Smaller blocks are necessary when building with concrete blocks in conjunction with other structures. The half, quarter and three-quarter blocks function as fitting pieces.

lees meer

Divider 40×40

The 40x40 divider makes the production of half, quarter and three-quarter concrete blocks possible. Smaller blocks are necessary when building with concrete blocks in conjunction with other structures. The half, quarter and three-quarter blocks function as fitting pieces.

lees meer

Mould 160x40x40/90°

Perhaps you would prefer to have a nicer finish to your storage bay in the shape of a roof. This mould produces perfect accompanying ridged blocks which fit on the blocks made with the 160x40x40 mould. This mould has 4 holes along the bottom, so that it fits perfectly over the standard blocks.

lees meer

Mould 150x60x60/90°

Perhaps you would prefer to have a nicer finish to your storage box in the shape of a roof. This mould produces perfect accompanying ridged blocks which fit on the blocks made with the 150x60x60 mould. This mould has 10 holes along the bottom, so that it fits perfectly over the standard blocks.

lees meer

Block clamp

The block clamp is a mechanical clamp with a reach of 40 to 80 centimetres used for moving and stacking concrete blocks. The block clamp is suitable for almost all concrete blocks produced using the Europeblock moulds (with the exeption of roof moulds). The clamp is simple to attach to a crane or other…

lees meer

Rubbers block clamp

To avoid damaging the concrete block during lifting, rubber guards have been placed on the inside of the block clamp. These rubbers grip and rub against the concrete which eventually causes them to wear down. It is possible to order extra rubbers so that your blocks remain undamaged, even after frequent use of the…

lees meer

Lifting beam

The lifting beam is a useful tool when attaching the block clamp to your forklift truck. Using this product you can stack your concrete blocks quickly and easily without a crane. Slide the lifting beam onto the forks of the forklift truck and attach them securely. If necessary, use extra safety chains to prevent…

lees meer